FAQ breeder

FAQ breeder

If you entered the wrong chip number, it cannot be changed just like that. The easiest solution is to fill in the contact form, including the microchip number and registration number, and clearly state the wrong and correct number. We will then take care of a correct registration.

In the United States, among others, the FDX-A microchip number is often used. An FDX-A chip number has a 10-digit code and mostly consists of 9 numbers and 1 letter. In Europe, the FDX-B chip numbers are always used for pets. These chip numbers are composed in a fixed manner – they always consist of 15 numbers. The first three numbers are either a manufacturer’s or country code. Manufacturer’s codes always begin with a 9, e.g. 945 for FiveStar transponders. A transponder number that begins with 999 is a test number which doesn’t have to be unique. If the number starts with a country code, the numbers in 4th, 5th and 6th position also have a fixed meaning. A number 0 on the 4th position means it is a test number and doesn’t have to be unique. A number beginning with 5281400 is a number from the Dutch ‘Raad van Beheer’ (Management Board). When there is a 2 in the 4th position, the numbers in 5th and 6th position are a derivative of the manufacturer’s code. This can be calculated by deducing the derivative number from 991. So, a number that starts with 5282460 is a chip number from the Netherlands (528) with a manufacturer code (2) of 945 (991 - 46 = 945). The last 8 numbers make the number unique. They are serial numbers which are not packaged in sequence. A box of chip numbers therefore seldom contains two sequential numbers. 

The ISO-standards 11784/85 together form the standard for electronic animal identification. ISO 11784 determines the number structure (15-digits, the first 3 are a manufacturer’s or country code). ISO 11785 describes the technical concept of the microchips. All chips sold by PetBase/Micpoint BV comply with these standards.

You can register through our website, but also directly with management software such as Animana, Vetware, DAISY and VetBase (more software to follow). After registration, the details are immediately accessible through our website.

Dogs born or imported after April 1st 2013 must be registered in a government-approved database. Also, all changes in the dog’s details must be recorded. As a database provider, we must offer the owner the opportunity to meet this obligation, without using the database’s function (reuniting a missing animal with its owner). If you indicate that the registration of a dog is not to be used for reunification, we cannot release any details of the owner once a missing dog has been found. In that case, the dog goes to an animal shelter and, after a fixed period, becomes eligible for relocation. Seeing that the databases mainly exist to reunite missing animals with their owners, we advise you to DO make use of the reunification possibility. Therefore, it is preferred to leave the tick box alone. Only use it if a new owner insists on not using the option and is well aware of the possible consequences. If an owner does not want to show his/her details in the public section, it is better to use the option "reporting institution only". In that case, a found animal can still be traced back to an owner through you or us. Also, try to explain to the owner that "public" means that his/her details can only be retrieved by someone who knows the 15-digit microchip number. We advise people to always choose for a full release of details (reporting institution + owner’s details) for a fast and simple reunification of a missing animal with its owner.

No, not all animals have this obligation. The obligation for 528 numbers applies to dogs and horses.